Modular Bridge Set, X-Beam Straight 186 mm + Curved R381 / 30°, for Kato Unitrack (N scale) - with 3 Pillars

A two-span N scale truss bridge that runs a Kato Unitrack 186 mm straight (20-010) straight into an R381 (15 in) 30 degree curve (20-140) - about 390 mm (15.4 in) of track on one bridge. The set joins our straight 186 mm X-Beam bridge and our curved R381 bridge end to end: the center pillar carries both bridge ends at the joint, with one straight pillar under the far end of the straight and one curved pier under the far end of the curve, all holding the deck 61 mm (2.4 in) above the baseboard. The Unitrack roadbed drops into the channel in both decks, and the trusses keep about 53 mm (2.1 in) of clearance above the rails. Choose whether the curve turns to the left or to the right as you face the bridge from the inside of the bend - the same kit builds either way, only the curved end pier differs. Pick the floor color and the panel color separately - the preview shows exactly your combination; the three pillars are printed in the floor color. Everything clicks together with pegs - no glue. In the box: 1 straight floor, 8 straight wall panels, 3 straight roof panels, 1 curved floor, 8 curved wall panels, 3 curved roof panels, 1 straight pillar, 1 curved end pier and the center pillar. Bought separately these bridges and pillars cost $82.46. Independently designed for use with Kato Unitrack; not affiliated with or endorsed by Kato.

Preorder. This finish is still in development. Order now and it ships as soon as it launches.